Flu A/B & Covid-19 ART Kit For Self-Testing 5s
The CorDx Tyfast Flu A/B & COVID-19 ART Kit For Self-Testing is a lateral flow immunoassay intended for the qualitative detection and di erentiation of SARS-CoV-2, influenza A, and influenza B protein antigens.
This test is authorized for non prescription home use with self-collected anterior nasal swab specimens from individuals aged 14 years or older, or with adult-collected anterior nasal swab specimens from individuals two (2) years or older.
This test is only authorized for individuals with signs and symptoms of respiratory infection consistent with COVID-19 within the first five (5) days of symptom onset when tested at least twice over three days with at least 48 hours between tests.
The product has achieved FDA approval and has been sold worldwide for many years without adverse events
Multi Target, User-Friendly, Nasal Swab
This is the first COVID-19, Influenza A, and Influenza B 3-in-1 self-test kit approved by Singapore HSA.
**Where applicable, items have a minimum of nine-month shelf life before expiry unless otherwise stated on product description.
Place of Origin
SINGAPORE
Product Usage
This test is authorized for non prescription home use with self-collected anterior nasal swab specimens from individuals aged 14 years or older, or with adult-collected anterior nasal swab specimens from individuals two (2) years or older.
1. Remove the swab from the pouch.
Note: Be careful not to touch the swab tip (soft end) with your hand.
2. Insert the entire soft end of the swab into the nostril no more than 3/4 of an inch (1.5 cm). Firmly and slowly rotate the swab 5 times, brushing against the inside walls of the nostril to ensure both mucus and cells are collected.
*Do not push the swab further if you meet resistance.
*For young children do not insert more than 1/2 inch.
*Using the same swab, repeat this process for the other nostril to ensure an adequate sample is collected from both nostrils.
3. insert the swab into the tube until it touches the bottom. Rotate the swab at least 10 times while pressing the swab head against the bottom and side of the tube.
4. Remove the swab while squeezing the sides of the tube. Attach the dropper tip firmly onto the tube.
5. Slowly squeeze the tube and dispense 3 drops of solution into the sample well.
Note: Invalid results can occur if less than 3 drops are added to the Sample Well.
6. Wait 10 minutes. Read the result after 10 minutes but before 30 minutes.
Do not read the result after 30 minutes.
Note: False results can occur if the test is read before 10 minutes or after 30 minutes.
Warnings
Read all instructions carefully before performing the test.
Failure to follow the instructions may result in inaccurate test results.
Serial testing should be performed in symptomatic individuals with SARS-CoV-2 negative results at least twice over three days (with 48 hours between tests) . You may need to purchase additional tests to perform this
serial (repeat) testing.
Consistent with serial testing recommendations for SARS-CoV-2, for multi-analyte tests, symptomatic individuals who test positive for influenza A or B on the initial test but test negative for SARS-CoV-2 should be
tested again in 48 hours to evaluate for co-infection with SARS-CoV-2 infection.
An anterior nasal swab sample can be self-collected by an individual aged 14 years and older. Children aged 2 to 13 years should be tested by an adult. Do not use on anyone under 2 years of age.
Wear a safety mask or other face-covering when collecting a specimen from a child or another individual.
Do not use if any of the test kit contents or packaging is damaged or open.
Test components are single-use. Do not re-use. Do not use the test kit after its expiration date. Do not touch swab tip when handling the swab. Exposure to hand sanitizer may cause false positive results
with this test. When collecting a sample, only use the swab provided in the kit. Once opened, the test cassette should be used within 60 minutes. If the pouch is open for more than an hour, invalid test results may occur. Testing should be performed in an area with good lighting. Do not read test results before 10 minutes or after 30 minutes. Results read before 10 minutes or after 30 minutes may lead to a false positive, false negative, or invalid result. Faint lines may appear on the test strip prior to running the test when tests are stored opened at hot and humid conditions. Do not read or interpret test results until after the sample has been added to the test cassette and the test has been allowed to run for 10 minutes. Keep testing kit and kit components away from children and pets before and after use. Avoid contact with your skin, eyes, nose, or mouth. Do not ingest any kit components. The reagent solution contains harmful chemicals (see table below). If the solution contacts your skin, eyes, nose, or mouth, flush with large amounts of water.
Width (cm)
7.6cm
Height (cm)
15.8cm
Depth (cm)
3.8cm