Flu A/B & Covid-19 ART Kit For Self-Testing 1s
The CorDx Tyfast Flu A/B & COVID-19 ART Kit For Self-Testing is a lateral flow immunoassay intended for the qualitative detection and di-erentiation of SARS-CoV-2, influenza A, and influenza B protein antigens.
This test is authorized for non prescription home use with self-collected anterior nasal swab specimens from individuals aged 14 years or older, or with adult-collected anterior nasal swab specimens from individuals two (2) years or older.
This test is only authorized for individuals with signs and symptoms of respiratory infection consistent with COVID-19 within the first five (5) days of symptom onset when tested at least twice over three days with at least 48 hours between tests.
The product has achieved FDA approval and has been sold worldwide for many years without adverse events
Multi Target, User-Friendly, Nasal Swab
This is the first COVID-19, Influenza A, and Influenza B 3-in-1 self-test kit approved by Singapore HSA.
**Where applicable, items have a minimum of nine-month shelf life before expiry unless otherwise stated on product description.
Place of Origin
SINGAPORE
Product Usage
"This test is authorized for non prescription home use with self-collected anterior nasal swab specimens from individuals aged 14 years or older, or with adult-collected anterior nasal swab specimens from individuals two (2) years or older.
1. Remove the swab from the pouch.
Note: Be careful not to touch the swab tip (soft end) with your hand.
2. Insert the entire soft end of the swab into the nostril no more than 3/4 of an inch (1.5 cm). Firmly and slowly rotate the swab 5 times, brushing against the inside walls of the nostril to ensure both mucus and cells are collected.
*Do not push the swab further if you meet resistance.
*For young children do not insert more than 1/2 inch.
*Using the same swab, repeat this process for the other nostril to ensure an adequate sample is collected from both nostrils.
3. insert the swab into the tube until it touches the bottom. Rotate the swab at least 10 times while pressing the swab head against the bottom and side of the tube.
4. Remove the swab while squeezing the sides of the tube. Attach the dropper tip firmly onto the tube.
5. Slowly squeeze the tube and dispense 3 drops of solution into the sample well.
Note: Invalid results can occur if less than 3 drops are added to the Sample Well.
6. Wait 10 minutes. Read the result after 10 minutes but before 30 minutes.
Do not read the result after 30 minutes.
Note: False results can occur if the test is read before 10 minutes or after 30 minutes."
Warnings
*Perform the test in a well-lit area.
*Do not read the result before 10 minutes or after 30 minutes—this may lead to incorrect or invalid results.
*Faint lines may appear on the test strip if stored in hot, humid environments; these should not be interpreted as results.
*Wait at least 10 minutes after adding the sample before reading the results.
*Keep all kit components away from children and pets.
*Avoid contact with skin, eyes, nose, or mouth.
*Do not ingest any part of the kit.
*The reagent solution is harmful—flush with water if it comes in contact with skin or eyes.
Width (cm)
7.6cm
Height (cm)
15.8cm
Depth (cm)
1.8cm